The more difficult the project, the more the application of new construction methods and new attachments, when a contractor purchased the ripper for the project. Unlike the single-point operation of the breaker, the ripper can crush the weathered rock piece by piece, and the work efficiency is greatly improved, and several other contractors are pushed out of the construction site.
Whether the penetration rate of attachments can be improved depends on its return on investment. In certain specific conditions, more specialized accessories can subvert the efficiency of the work, and the contractor earns a lot of money.
Ripper: Also known as ripper, the ripper has a workable device that is broken and loosened. Divided into excavator ripper and bulldozer ripper, excavator ripper is also called bucket hook, bulldozer ripper is also called tail hook, generally single tooth, also has two or three teeth, excavation and cutting force. An integrally cast loose tooth with an ear hole in the upper part, respectively hinged to the arm and the bucket cylinder, the front end of the tooth tip has a hard alloy surfacing tooth cap, and when the piston rod of the hydraulic cylinder is extended, the tooth tip is forced to be inserted And turn the soil. It is used to excavate cracked rocks, crush frozen soil, and also used to excavate asphalt pavement. It is suitable for the crushing and splitting of hard soil, secondary stone and weathered stone, so as to facilitate the use of excavation construction, the stratification of working conditions is better, the bucket is hard to dig, and the hammer is a little easy to waste, then the ripper is used. It will greatly improve the construction efficiency, first use the ripper to separate the soil layer or the weathered stone layer, and then use the quick connector to switch the bucket loading!
Jining Changsong Construction Machinery Co., Ltd. is a modern enterprise specializing in R&D, manufacturing and sales of excavator front-end devices. The company mainly produces: various types of excavator front-end attachments such as broken hammer, quick connector, ripper, tamping machine, wood grabber, stone grabber and hydraulic clamp. At the same time, we can customize special devices for different working conditions according to the customer's working environment requirements. We are committed to building a professional manufacturer of excavator front-end devices. You are welcome to call us and negotiate.
For more information,please look at this web.