The hydraulic clamp consists of a caliper body, a hydraulic cylinder, a movable cymbal and a fixed cymbal, and a slewing mechanism. The external hydraulic system provides oil pressure to the hydraulic cylinder, so that the movable jaws and the fixed jaws of the hydraulic smashing tongs are combined one by one to achieve the effect of smashing objects. The slewing mechanism can be easily operated at the most suitable angle.
It is the same as the installation principle of the hydraulic breaker. The pin hole of the hydraulic crusher is connected with the pin hole of the front end of the excavator, and the pipe on the excavator is connected with the hydraulic crusher. After the installation, the crushing operation can be performed. It is.
It seems that the power is huge.
Demolition of excavators is a very common project. At present, we often see the destruction of load-bearing walls or concrete frames directly with buckets or breakers to collapse the building.
Although this method is simple and straightforward, it will generate a lot of dust, pollute the surrounding environment, and the risk is high.
In response to this condition, many professional engineering teams have equipped hydraulic tongs for the excavator. In the process of demolishing a building, bulk materials can be removed from the building and then subdivided.
Professional hydraulic pliers bring four advantages, one is to reduce the pollution of dust to the environment, the second is to reduce the risk, the third is to facilitate the recycling and reuse of materials, and the fourth is that its blade is forged from hot-rolled steel. Made of high strength, with the powerful hydraulic system of the excavator, the removal efficiency is extremely high.
Such a super long arm excavator is demolished from the building and can be slowly removed from the top of the building. In addition, the super power of the hydraulic clamp is much safer and more efficient than using the cannon hammer below.
But the cost of hydraulic clamps is also much more expensive than broken hammers.
The construction site pays attention to the dust protection. When the building is demolished, it should be sprayed with water to reduce dust. In addition, the crane has to hang the curtain to cover the splash of the stone.
The hydraulic clamp is like a big mouth of a blood bowl used to bite things. With its teeth, it can bite a solid reinforced concrete building and hard metal to achieve the purpose of cutting, crushing and dismantling. The efficiency is two to three times that of the broken hammer, quite domineering!
The hydraulic clamp consists of a caliper body, a hydraulic cylinder, a movable cymbal and a fixed cymbal, and a slewing mechanism. The external hydraulic system provides oil pressure to the hydraulic cylinder, so that the movable jaws and the fixed jaws of the hydraulic smashing tongs are combined one by one to achieve the effect of smashing objects. The slewing mechanism can be easily operated at the most suitable angle.
It is the same as the installation principle of the hydraulic breaker. The pin hole of the hydraulic crusher is connected with the pin hole of the front end of the excavator, and the pipe on the excavator is connected with the hydraulic crusher. After the installation, the crushing operation can be performed. It is.
It seems that the power is huge.
Demolition of excavators is a very common project. At present, we often see the destruction of load-bearing walls or concrete frames directly with buckets or breakers to collapse the building.
Although this method is simple and straightforward, it will generate a lot of dust, pollute the surrounding environment, and the risk is high.
In response to this condition, many professional engineering teams have equipped hydraulic tongs for the excavator. In the process of demolishing a building, bulk materials can be removed from the building and then subdivided.
Professional hydraulic pliers bring four advantages, one is to reduce the pollution of dust to the environment, the second is to reduce the risk, the third is to facilitate the recycling and reuse of materials, and the fourth is that its blade is forged from hot-rolled steel. Made of high strength, with the powerful hydraulic system of the excavator, the removal efficiency is extremely high.
Such a super long arm excavator is demolished from the building and can be slowly removed from the top of the building. In addition, the super power of the hydraulic clamp is much safer and more efficient than using the cannon hammer below.
But the cost of hydraulic clamps is also much more expensive than broken hammers.
The construction site pays attention to the dust protection. When the building is demolished, it should be sprayed with water to reduce dust. In addition, the crane must be covered with a curtain to cover the splash of the stone.
For more information,please lookthrough the following: